|
Front wiper arms to shaft, 43 inch pounds. I tried tightening to spec some years ago, wasn't enough :-) Alistair
> On Apr 29, 2017, at 11:17 AM, C. Abney <tsudonimh@GMAIL.COM> wrote: > > 27in*lbs for the 010 AT filter retaining screws! I think that's the > lowest. And the ATF pan bolts are something like 15ft*lbs... > >> On 4/28/17, David Beierl <dbeierl@attglobal.net> wrote: >> I have 50 and 150 lb-ft beam type and a 150 lb-ft half inch drive clicker. >> Also a lower range dial type calibrated in lb-inches. The clicker also has >> a ratchet which is convenient. >> >> Yrs, >> d >> > > > -- > It seems my TO-DO list is a FITO (faster-in-than-out) |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.