Date: Wed, 3 May 2017 14:40:49 -0400
Reply-To: "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Subject: Re: New headlight protectors set available for square headlights.
In-Reply-To: <AT5PR84MB006788202FC10BCE7E23B2358B160@AT5PR84MB0067.NAMPRD84.PROD.OUTLOOK.COM>
Content-Type: text/plain; charset=UTF-8
Joel, no problem. Canadians are some of my best customers!
The LED headlights replace the outer light bulb so they do high and low
outer, but the inner I am still working on. I think the biggest problem
with finding some inner ones that will work would be the fact that the
bulbs have a large butt on them to allow for the heat sink. The inner
light covers the entire rear of the bulb to seal up the housing. So
finding something that will fit inside the housing and work may be
impossible. You can't just leave the rear cover off as this would allow
moisture inside the housing and goof everything up.
The bulbs are 6000k color temperature (white), and 4000k lumens per bulb.
I haven't gotten an amp draw number on them yet but it is ALOT less than
stock so it should keep your wiring and switch from needing relays or
melting down in the future.
Ken
On Wed, May 3, 2017 at 12:47 PM, Liberte, Joel <joel.liberte@hpe.com> wrote:
> Hi Ken,
>
> First off thanks much for adding the Canadian component to your site, very
> helpful to those of us this direction.
>
> Was looking at the head light covers for the square headlights, definitely
> will be ordering a set.
>
> Before I do, I also just noticed the LED headlight set, which I seriously
> need to do something about at least the low beam. Forgive me as maybe I'm
> missing the obvious, is this set just for the low beam, bulbs for both low
> and high, or a combo bulb that does both, which obviously isn't how the
> square light system is set up.
>
> Also, do you have any specs on those; wattage, current draw, lumens, etc?
>
> Joel Liberte
> HPE Flexible Capacity Portfolio
> 905-304-8748
> joel.liberte@hpe.com
>
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
> Of kenneth wilford (Van-Again)
> Sent: Wednesday, May 03, 2017 10:45 AM
> To: vanagon@GERRY.VANAGON.COM
> Subject: New headlight protectors set available for square headlights.
>
> OK, some of you may remember that we used to sell these back in the day
> for around $100 a pair. They were made by a Canadian company that seemed
> to make a couple of pairs whenever the mode struck them and then sell them
> for mad money. About six or seven years ago they stopped, I called them to
> see if I could get them to make a run for me specifically and they told me
> they had thrown away the tooling and didn't care about making any more ever.
>
> I had a set on my 90 Carat and through the magic of reverse engineering, I
> got them reproduced and now I have them for sale for $59 a set. They are
> just as good if not better than the ones people were begging to buy from me
> at $125 (yup that is what I was selling them for, when they got ultra hard
> to get). Here is a video explaining why I love them and think they are the
> best headlight protectors ever! Sorry they are for square headlight
> grilles only.
>
> https://www.youtube.com/watch?v=E0w0jnjgptg
>
> --
> Thanks,
> Ken Wilford
> John 3:16
> www.vanagain.com
>
--
Thanks,
Ken Wilford
John 3:16
www.vanagain.com
|