Date:         Fri, 12 May 2017 05:17:33 -0400
Reply-To:     Frank Condelli <RAlanen@AOL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: Use 1.25" Semi Truck (Heater?) Hose for Main Coolant Hose?
Content-Type: text/plain; charset=utf-8

        Two 1-1/4” Greenstripe II hoses side by side fit.  I have personally done it many times.  Tight fit but they do fit !

> On May 12, 2017, at 12:00 AM, Automatic digest processor <LISTSERV@GERRY.VANAGON.COM> wrote:
> 
> Years ago I replaced one steel coolant line with marine hose, rubber. Greenl=
> ine I think. This was in my old 82 diesel that I converted to 1800 gasser. I=
> t worked fine for the 10 years I ran that van. This was full length from eng=
> ine to rad. But one caveat, it was only the one line that was replaced, I ra=
> n the new line rubber line parallel to remaining steel. It was a tight fit t=
> hrough the body members. I don't think I could have ran two rubber lines.

Cheers,    

Frank Condelli
Almonte, Ontario, Canada
'87 VW Westy, '00 Kawasaki 250 Sherpa, "98 Ducati 750 Monster & Lionel Trains (Collection for sale <http://frankcondelli.com/trainsal.htm>)
Frank Condelli & Associates <http://www.frankcondelli.com/> - Vanagon/Vanagon Westfalia Service in the Ottawa Valley
BusFusion <http://www.busfusion.com/> a VW Camper camping event, Almonte, ON, June 08 ~ 11, 2017