Date: Tue, 6 Jun 2017 21:10:37 +0000
Reply-To: Jim Felder <jim.felder@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Jim Felder <jim.felder@GMAIL.COM>
Subject: Re: Looking for diesel vanagon water pump pulley and shims
In-Reply-To: <CANEuo0hOi=L9nY+54z51_YbvZzE_LmSAn1CMVFYu+eK30GaEiw@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
OK, I am not looking at a diagram or anything but doesn't the back pulley
go to the alternator, and the adjustment is done through the alternator
mount? The front sheave takes the drive belt off the crank pulley? It
adjusts with shims, and there is a hub involved. I have the WP pulley that
comes as a unit, but only one of the sheaves of the front assembly, which
means I have the other one too but can't locate it. I have three shims and
one hub/spacer, two of the rear pulleys that mount to the water pump and so
far one half of an outer pulley.
All 52 mm off an 82 NA.
Jim
On Tue, Jun 6, 2017 at 3:41 PM kenneth wilford (Van-Again) <
kenwilfy@comcast.net> wrote:
> It is an 82 NA.
>
> Ken
>
> On Tue, Jun 6, 2017 at 4:37 PM, Jim Felder <jim.felder@gmail.com> wrote:
>
>> Then that an NA, right?
>>
>> Jim
>>
>> On Tue, Jun 6, 2017 at 3:32 PM kenneth wilford (Van-Again) <
>> kenwilfy@comcast.net> wrote:
>>
>> > I need what they are calling 40mm. Not sure if this is the 36mm that
>> you
>> > are talking about.
>> >
>> > ken
>> >
>> > On Tue, Jun 6, 2017 at 4:29 PM, Jim Felder <jim.felder@gmail.com>
>> wrote:
>> >
>> >> I have a whole box of diesel pulleys, pretty sure I have one. Do you
>> need
>> >> for a 36 or 30 mm pump? I may have that wrong, but large and small,
>> >> whatever. I need to know which. Also probably have the shims, at least
>> >> enough to get him by.
>> >>
>> >> Lemme know and I will look.
>> >>
>> >> Jim
>> >>
>> >> On Tue, Jun 6, 2017 at 2:26 PM kenneth wilford (Van-Again) <
>> >> kenwilfy@comcast.net> wrote:
>> >>
>> >> > I have a customer that is having a new engine installed. In the
>> midst
>> >> of
>> >> > this the first shop that was working on it closed and the mechanic
>> moved
>> >> > away while the van sat on his lot. Eventually the van was moved to a
>> >> new
>> >> > shop and they are finishing up the install but the water pump pulley
>> >> halves
>> >> > and the shims for the diesel Vanagon water pump are missing. Does
>> >> anyone
>> >> > have a set of these sitting around that they would be willing to part
>> >> > with? Or know of something that could work in place of it. Please
>> let
>> >> me
>> >> > know.
>> >> >
>> >> > --
>> >> > Thanks,
>> >> > Ken Wilford
>> >> > John 3:16
>> >> > www.vanagain.com
>> >> >
>> >>
>> >
>> >
>> >
>> > --
>> > Thanks,
>> > Ken Wilford
>> > John 3:16
>> > www.vanagain.com
>> >
>>
>
>
>
> --
> Thanks,
> Ken Wilford
> John 3:16
> www.vanagain.com
>
|