Date:         Mon, 5 Jun 2017 22:54:30 -0700
Reply-To:     Christophe Guilbert <cguilbert@PICASSO.UCSF.EDU>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Christophe Guilbert <cguilbert@PICASSO.UCSF.EDU>
Subject:      Protect PTFE AN8 hose from heat
Comments: To: "TYPE2@type2.com" <TYPE2@type2.com>
Content-Type: text/plain; charset=utf-8; format=flowed

Hi guy ,

I am installing a second oil cooler in the front of my air-cooled
vanagon 1983 camper.
I am using a PTFE braid AN8 hose line and was wondering about a way to
better shield the hose from the hight exhaust temperature by using a sleeve.

I found this one:
http://www.extremeheatprotection.com/AB-Thermal-catalog-S-FG-KP.pdf

Did any one tried to prevent or shield the oil hose against temp above
the exhaust ?
If so , How ?

Thanks for any advise.

Chris

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.