Date:         Wed, 21 Jun 2017 12:20:06 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Minor fridge mods addendum
Comments: To: Alistair Bell <albell@shaw.ca>
In-Reply-To:  <71E7488B-1E2C-4D21-872A-9D4FCD702CA0@shaw.ca>
Content-Type: text/plain; charset="UTF-8"

I'm sure Alistair would have done this correctly but would suggest to
others that when re installing the aluminum finned unit, make sure the
left hand end (as you look at it installed) is NOT seated over the lip
on the left hand end of the black "cold" tube. Also, there should be a
narrow ~ 2" long white bit that holds the flexible silver looking tube
into place (against it really) on the finned unit. That tube comes
from the thermostat and AFAIK its purpose is to "read" the temperature
at the finned unit.

Neil.

On 6/19/17, Alistair Bell <albell@shaw.ca> wrote:

> Got a comment by Dgbeatty prompting me to pull the inside fins and freshen
> up the thermal paste. I followed the advice, but had no thermal paste.


--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>