Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2017, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 21 Jun 2017 16:54:22 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: Vanagon Syndrome TSB 92-02: Also Applies To Digijet ?
Comments: To: Neil N <musomuso@gmail.com>
In-Reply-To:  <CAB2RwfiMZLJZeeYRPLVWPyaVnFrhFXf7LK946LAG_5i8h5M0vw@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

It's yes.

Yrs, d

On Wed, Jun 21, 2017 at 4:49 PM, Neil N <musomuso@gmail.com> wrote:

> Hi all. > > Does this TSB 92-02 in the archives: > > http://gerry.vanagon.com/files/technical/VW-Technical-Bulletins.txt > > suggest that Vanagon Syndrome can happen on a Digijet equipped Vanagon? > > I see the upper case Digijet comment in the BTDT web page here: > > http://www.vanagonauts.com/Capacitor-Fix160.htm > > so I'm think the answer is "yes". > > Thanks, > > Neil. > > ------------------ > > > Technical Bulletin Group: 24 Number: 92-02 Date: April 30, 1992 > Subject: Vanagon Drivability Complaints Model(s): All Water Cooled > Engine Vanagons SUPERCEDES TECHNICAL BULLETIN 24-92-01 (February 29, > 1992) CONDITION After driving for an extended period of time at a > constant speed, the vehicle may, on occasion, experience a > deterioration of performance which may be accompanied by a hesitation > or surging. In many cases, after turning off the engine and subsequent > re-start or without having taken any action, the symptoms disappear. > These symptoms may not recur for several weeks or months. SERVICE To > resolve this condition, wire harness Part No. 025 906 302, should be > installed. This harness provides improved signal voltage > stabilization. * remove electrical connector from air flow sensor * > install wire harness, Part No. 025 906 302, between main harness > connection and air flow sensor connection. > > -- > Neil n > > Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca> > > 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy> > > 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/> > > Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay> >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.