Date:         Sat, 17 Jun 2017 07:36:40 -0700
Reply-To:     Alistair Bell <albell@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alistair Bell <albell@SHAW.CA>
Subject:      Re: Aluminum door card
Comments: To: Roman Haag <romanhaag@YMAIL.COM>
In-Reply-To:  <E6351CB9-D789-4B3C-A4AA-48BA4C25CF92@ymail.com>
Content-Type: text/plain; charset=us-ascii

Yes Roman, the screws are the ticket. A little more awkward to attach at the rear of the panel but one generally doesn't take the panel off very often. 


And yes, there is a local outfit that has done some vinyl wraps on aluminum for us. But it still leaves a cold feeling surface. I need a little padding/insulation and some sort of fabric.

Cheers

Alistair

>  Jun 17, 2017, at 6:26 AM, Roman Haag <romanhaag@YMAIL.COM> wrote:
> 
> I like it!  Especially the screwing down part. 
> I wouldn't know the cost of it, but you could go to any company that wraps vehicles and easily have vinyl(?) sheet if whatever pattern you want installed on it if the get tired of it. 
> Roman 
> 
> 
> 
>> On Jun 17, 2017, at 06:51, Roy Nicholl <RNicholl@NBNET.NB.CA> wrote:
>> 
>> Alistair,
>> 
>> I must admit, I found the bumper obsession a much more alluring and useful tour ;-)
>> 
>>> On 17-Jun-2017, at 00:36, Alistair Bell <albell@SHAW.CA> wrote:
>>> 
>>> Yeah, so much wrong with this idea but still...
>>> 
>>> I had the material, and it really couldn't use it ( 2024-t5 aluminum ) for anything else so I made a door card.
>>> 
>>> Still has to be covered with some sort of fabric. 
>>> 
>>> https://shufti.blog/2017/06/16/vanagon-the-aluminum-obsession-continues-sliding-door-card/
>>> 
>>> Alistair