Date:         Sat, 17 Jun 2017 22:41:30 -0700
Reply-To:     Alistair Bell <albell@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alistair Bell <albell@SHAW.CA>
Subject:      Re: Pop top seal replacement
Comments: To: Stephen Grisanti <bike2vcu@yahoo.com>
In-Reply-To:  <1342891954.769774.1497756488254@mail.yahoo.com>
Content-Type: text/plain; charset=us-ascii

I can recommend the interlux briteside one part poly, brushed on with small short nap or foam roller then tipped off with brush. Doing about a two foot square section at a time. 

And I did it with roof off.

But boy it's hard on the eyes painting white in the sun :)

Alistair



> On Jun 17, 2017, at 8:28 PM, Stephen Grisanti <bike2vcu@yahoo.com> wrote:
> 
> Boring, perhaps, but I'm due to perform the same task so am always happy to see how others approach it. 
> 
> I'm also debating repainting the top bright white instead of repeating the current grey.  All this will happen when the canvas gets replaced.
> 
> Then there's new stainless roof hardware and footman loops to consider.  And there's a small crack in the roof itself at the left rear.  Nothing is ever simple.
> 
> 
> Stephen
> 
> 
> On Saturday, June 17, 2017 10:15 PM, Alistair Bell <albell@SHAW.CA> wrote:

> 
> 
> A very dull and boring blog post about a new pop top seal.
> 
> https://shufti.blog/2017/06/17/vanagon-pop-top-seal-replacement-and-new-decals/
> 
> Alistair
> 
>