Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2017, week 3)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 20 Jun 2017 21:57:18 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: BIG RED FLAG > SmallCar BellHousing + LUK Clutch Disc =
              Disaster ~
Comments: To: OlRivrRat <OlRivrRat@comcast.net>
In-Reply-To:  <4C2140C0-96C9-4E48-ACB5-1B2A08FA76D6@comcast.net>
Content-Type: text/plain; charset="UTF-8"

> then Dismantle the Disc with an Angle Grinder in order to get the Disc off the Trany ~

wow. That's a bunch of work. What a drag. Good of you to post that information. Devils in the details eh?

One reason I'd considered a Suby 2.2 swap was the non interference aspect. But that was some years ago. Most do the 2.5 I hear.

Neil.

On 6/20/17, OlRivrRat <OlRivrRat@comcast.net> wrote: > To Those who have done or are considering a Subaru Conversion in > Their Vanagon & > > decide to use the SmallCar Performance Route (as I would again if I were to > do it again) ~ > > As Has Been Mentioned before By Ben @ > http://www.benplace.com/bjp3.htm & I > > Unfortunately Forgot ~ > > DO NOT USE an LUK Clutch Disc in a SmallCar BellHousing ~ Disaster > Happens ~ > > 6Mo old Metal Slave/Release Bearing from VW Dealer + Brand Spankin New Luk > Clutch Disc > > resulted in both being Destroyed ~ It took about 2.5Min's of Eng run for the > Disc Snout to > > LockUp/Cease inside the Slave ~ I had to remove the Pressure Plate bolts > through the slot > > in the bottom of the BellHous' in order to get the the Trany Down & then > Dismantle the Disc > > with an Angle Grinder in order to get the Disc off the Trany ~ > > ORR > ~ DeanB > > & By the way ~ Reason for the Clutch Work was due to having the EJ25 > Out for Replace > > by Rebuild @ 75K Mi's Due to a Gates TimingBelt Coming Apart @ 50K Mi's ~ > Not been Good > > here for the past 6 Weeks ~ >

-- Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.