Date:         Fri, 30 Jun 2017 14:04:07 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: refrigerator update
Comments: To: David McNeely <davmcneely40@gmail.com>
In-Reply-To:  <CACvdLxNbWcP+qyNoBf5_GxOJ4xCBoSYT7h3FD3D2Q2rAdOqhXA@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

If you need to replace the silicone gasket of the burner box you can make
one using high-temp silicone RTV gasket maker.  Smear the mating surfaces
and screws with a trace of Vaseline, initially insert the screws so the
thickness is a bit greater than the original gasket.  After it's cured for
a while tighten to original thickness.

But it doesn't matter if the original is ratty around the edges, it's only
where it seals that matters.+

Yrs,
d

On Fri, Jun 30, 2017 at 1:47 PM, David McNeely <davmcneely40@gmail.com>
wrote:

> Well, I have the refrigerator out again and the steel propane line from the
>