Date:         Fri, 30 Jun 2017 18:07:48 -0700
Reply-To:     Stuart MacMillan <stuartmacm@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stuart MacMillan <stuartmacm@GMAIL.COM>
Subject:      Re: Leaking plenum hose
Comments: To: B Feddish <UprightBassGhost@HOTMAIL.COM>
In-Reply-To:  <BLUPR06MB33721128855E81C299A4620CED30@BLUPR06MB337.namprd06.prod.outlook.com>
Content-Type: text/plain; charset="iso-8859-1"

Best to remove the intake pipes from the head. If you have A/C and  your
leaking hose is on the left side, it's a bit more work because you need to
remove the compressor.  Just unbolt it and move it out of the way.  Van Café
has the hoses:
http://www.van-cafe.com/page_423_577/intake-manifold-hose-p423   Replace
them all if you want to do this right and the intake manifold gaskets too:
http://www.van-cafe.com/page_425_135/intake-manifold-gasket-p425  Or, if
yours are good, you can re-use them, but I'd spray new or used with Copper
Coat or similar sealant.

I have a set of those hoses I'll never use, $20 + $6.25 postage in the US.
Pmail me if you want them.

Stuart

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of B
Feddish
Sent: Friday, June 30, 2017 1:22 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Leaking plenum hose

I was doing my before trip inspection and It turns out I have a leaking
plenum hose. Its one of the 4 braided hose that connects to the sides of the
plenum. Is there an easy way to replace these?

Thanks,
Bryan


Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
10