Date:         Mon, 3 Jul 2017 18:47:59 -0400
Reply-To:     "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Subject:      Re: How to replace the electric motor
Comments: To: Gilles Turmel <gilles.turmel@sympatico.ca>
In-Reply-To:  <014a01d2f444$908b2fc0$b1a18f40$@sympatico.ca>
Content-Type: text/plain; charset="UTF-8"

Yes you can remove just the motor without taking out the regulator.  You
remove the door panel, then remove the 10mm bolts by the motor.  Unplug it
and you can pull it far enough out of the hole in the lower section of the
door to get access to two other 10mm bolts that hold the motor to the
regulator.  Use a socket and rachet to remove these and the motor will
separate from the regulator and you the regulator is still in the door
holding the window up.

Ken

On Mon, Jul 3, 2017 at 5:37 PM, Gilles Turmel <gilles.turmel@sympatico.ca>
wrote:

> Hi,
>
> I have to replace the electric motor on the right hand side of my 89 Westy
> Syncro. Do I have to take out the regulator in order to replace the motor?
> My window is stuck in the open position. Does anyone know if there is a
> someone that refurbish those electric motors?
>
> Best regards.
>
>
>
> Salutations
>
> Gilles Turmel
>



--
Thanks,
Ken Wilford
John 3:16
www.vanagain.com