That connector only affects the LED panel and sink pump, doesn't affect fridge operation. The flame detector is handy but the fridge will run fine without it. On Wed, Jul 12, 2017 at 1:20 PM, Alistair Bell <albell@shaw.ca> wrote: > The panel lights... culprit is most likely the multiprong connected to > panel from fridge. It's a tight fit connector but I've had bad connection > there in the past. Deoxit on it and reseating has worked. > > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.