Date:         Mon, 17 Jul 2017 19:33:18 -0700
Reply-To:     Patrick Spragge <spraggepat@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Patrick Spragge <spraggepat@GMAIL.COM>
Subject:      Re: ISO upper and lower cupped steel washers for bottom sway bar
              mount
Comments: To: Jim Felder <jim.felder@GMAIL.COM>
In-Reply-To:  <CAFnDXk3bWeQPTnecJ1x7CXP=OtwUqTB6dY+3C7zUdubJxyBV2Q@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii

Did you try to discuss your situation with Chris at T3? Might be flexible and sell you the washers.

Patrick Spragge

> On Jul 17, 2017, at 6:54 PM, Jim Felder <jim.felder@GMAIL.COM> wrote:
> 
> Yes, thanks but I'd hate to pay 25 bucks for just the two washers I need.
> The other stuff came with the poly bushing order, but not the washers. Now

> I would have to buy that stuff over again. Still holding out for someone
> with a pair of the cupped washers only.
> 
> Jim
> 
>> On Mon, Jul 17, 2017 at 8:11 PM Steven Shelton <shelton4@gmail.com> wrote:
>> 
>> Are these what you need:
>> 
>> 
>> http://www.t3technique.com/suspension-and-drivetrain/vanagon-suspension/front-suspension-parts/hardware/stainless-steel-endlink-hardware-kit.html
>> 
>> 
>> 
>>> On Mon, Jul 17, 2017 at 8:30 PM, Jim Felder <jim.felder@gmail.com> wrote:
>>> 
>>> Good idea. Will do that if I don't find any actual vanagon equipment. I do
>>> worry about about the size of the hole, it has to contain the sleeve that
>>> goes in there.
>>> 
>>> Thanks,
>>> 
>>> Jim
>>> 
>>>> On Mon, Jul 17, 2017 at 7:12 PM Dan N <dn92610@gmail.com> wrote:
>>>> 
>>>> some old cars use the same cupped steel washers for the upper bold of
>>> the
>>>> shock absorbers. I went to a junk yard, open the hood, look, found them

>>> and
>>>> remove them... sorry I forgot the brand the the junk...
>>>> 
>>>> dan
>>>> 
>>> 
>> 
>>