There is a Lot of Heat produced when a Male Thread is Joined with Female Thread so They Both Expand & then when They Cool, Leaks Can Happen ~ So Most, if not All, Thread "Seal" Materials are meant to do DoubleDuty ~ Lube durring install & Seal after the fact ~ The Tranny Plugs are Tapered & Quite Susceptible to that Install HeatUp ~ RTV or Teflon Tape works Well ~ ORR ~ DeanB On 5 Aug , 2017, at 2:00 PM, steve meassick wrote: > I am changing the transmission oil and am wondering if thread sealer should be used on the drain plug. It looks like none was used on the fill plug but may have been used on the drain plug. > > > > Steven Meassick |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.