If you're not getting +12 on the coil positive side, then ignition switch is likely reason. But before you said you *do* have power to the coil. If you jumper 12V to the coil positive side that is the same as turning the key on. It will even back-feed the instruments. This can be handy for testing or as a quick fix. Yrs, d On Sat, Aug 5, 2017 at 10:14 PM, Richard Golen <rgolen@hotmail.com> wrote: > No getting keyed power to the coil. Not getting spark to the coil.. > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.