Date:         Sat, 5 Aug 2017 02:48:25 -0400
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: Time Delay LED Lighting Circuit
Comments: To: Alistair Bell <albell@shaw.ca>
In-Reply-To:  <CAMOH8L+VVn=o3jZDKgRw7M_inZ5g8KUNqt5V9AOmUcHOycrZcw@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

The 390K resistor has to be the timing resistor.  Both diodes and that
resistor appear to be connected to the positive side of the cap.

On Sat, Aug 5, 2017 at 2:34 AM, David Beierl <dbeierl@attglobal.net> wrote:

> That is a very clever circuit, and cleverly laid out as well.
>
> BD 433 is a 22 volt GP NPN transistor, E C B left to right on top
> surface.  It does the switching.  Its base is connected to presumably the
> emitter of the next transistor (if it's an NPN type as well).
>
> It would be really nice to know what's written on the fronts of those two
> transistors, also the complete legend on the diodes.
>
> Yrs,
> d
>
> On Sat, Aug 5, 2017 at 1:32 AM, Alistair Bell <albell@shaw.ca> wrote:
>
>> Dick,
>>
>> That looks nice and compact, david or others, what's going on there
>> beside the obvious?
>>
>