I could at best theorize that you damaged one in the process of removal- i.e. A pin came out and is lodged in the harness- now missing that pin on one and having a bad contact on the other is causing a problem- it's a theory 😬 In other words- you broke something taking one out and that is impacting the install of the other- something that is common between the 2... Or you had both energized without battery disconnected when you took both out?!? Without looking at it I just can't tell.... Hoping it turns out to be something simple!!! Dave > On Aug 18, 2017, at 6:24 PM, John Rodgers <jrodgers113@GMAIL.COM> wrote: > > These things are a bloody pain sometimes. > > Two vans, two ECU'S, two running vans. Swap the ECU's, and neither car will > run. Explain that one! > > John |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.