Date: Fri, 18 Aug 2017 09:45:36 -0700
Reply-To: Stuart MacMillan <stuartmacm@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Stuart MacMillan <stuartmacm@GMAIL.COM>
Subject: Re: Fuel Line Replacement Kits Galore!
In-Reply-To: <4D2B945D-6F5B-482C-883E-AF9ED68DD6A7@icloud.com>
Content-Type: text/plain; charset="utf-8"
They are better quality, and another thing is that ozone and NOx levels in big city air was much higher in the '80s than it is today, both of which attacked rubber. I don't expect to replace these seals again in my lifetime, but I'm old. Still, I'd expect these to last at least another 30 years if not longer, since they are not exposed to UV, and modern synthetic rubber (EPDM) is very stable and long lasting. It's even used as roofing on flat roofs and has a 50 year warranty in that application.
Stuart
-----Original Message-----
From: Jeff Palmer [mailto:w.jeff.palmer@icloud.com]
Sent: Friday, August 18, 2017 9:17 AM
To: Stuart MacMillan
Cc: vanagon@GERRY.VANAGON.COM
Subject: Re: [VANAGON] Fuel Line Replacement Kits Galore!
Related question - I had always assumed that modern fuel lines were better quality than in the past. That it was important to change out the old lines. But do the replacement sets deteriorate as badly as the original? If so how frequently should I be replacing them?
Thanks
Jeff
Sent from my iPhone
> On Aug 18, 2017, at 11:07 AM, Stuart MacMillan <stuartmacm@GMAIL.COM> wrote:
>
> I also bought the Van Café kit with the steel fittings. The system is
> not under pressure, and on my '85 there were no clamps at all. The
> crimp type clamps are fast to install (good for pros), but you need a
> special tool. The installation is not particularly difficult, just
> time consuming. Be sure to replace the short hoses on the injectors
> too, as Ken demonstrates: https://www.youtube.com/watch?v=IEWk7iAnl7U
>
> Stuart
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On
> Behalf Of Steve Williams
> Sent: Thursday, August 17, 2017 10:34 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Fuel Line Replacement Kits Galore!
>
> Hi,
>
> The big difference is the type of clamps.
>
> Go-Westy uses:
> Twenty-six (26) special crimp-style ear clamps (two large and 24
> small)
>
> Other's use screw type, which is my preference, but it is quite a controversial topic!
>
> Additionally, I bought..
> http://www.van-cafe.com/page_494_293/fuel-tank-reseal-kit-b
>
> What I liked about it was the metal inserts of the cross over pipe rather than plastic of other kits.
>
> Cheers,
> Steve
>
>> On 17/08/2017 11:01 PM, PB wrote:
>> So far I've seen kits and "a la carte parts" from GoWesty, Van-Cafe,
>> Bus Depot, and Van-Again. Are they all pretty much the same, or is
>> one of these kits easier to work with? (GW and Van-Cafe include the
>> fuel injector seals, which can be ordered separately from Bus Depot
>> and Van-Again.) Patti
>> 90 Westy Automatic
>>
>>
>>
>>
|