Don't forget the two screws in each side of the stove unit. Alistair > On Aug 28, 2017, at 8:14 AM, Stacy Schneider <vwcrewman@GMAIL.COM> wrote: > > Pull the knobs and then the jam nuts. Underneath the front of the face are > 3 small Phillips screws. Pull the bottom out and push the face plate up. > There is normally crap in the upper lip, clean it out as best you can and > spray some WD40 or something along the edge to help break up the crap. They > are tight coming off and just barely pass the shafts. > > > Stacy > >> On Mon, Aug 28, 2017 at 7:27 AM, Richard A Jones <jones@colorado.edu> wrote: >> >> How do I remove the face plate of the Westy stove-- >> >> the front part with the LED panel and the gas knobs? >> >> I had it off, or saw how it came off, when I put in the >> >> Vitrifrigo, but that was 8 years ago and I've forgotten, >> >> except that some part was stuck hard. >> >> >> I have the three "secret" screws out, the gas valve >> >> nuts off and the LED panel removed. Now? >> >> >> Thanks, >> >> Richard >> > > > > -- > 1989 Swedish Tristar with Aluminum gates and Atiwe 16" Wheels. > Oldest son is an Eagle scout. |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.