Date:         Sun, 27 Aug 2017 10:26:52 -0700
Reply-To:     Stacy Schneider <vwcrewman@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stacy Schneider <vwcrewman@GMAIL.COM>
Subject:      Re: Power window switch relocation
Comments: To: Toomey Douglas <drt@UOREGON.EDU>
In-Reply-To:  <19805236-FE22-47A9-9C13-147E476D3A01@uoregon.edu>
Content-Type: text/plain; charset=us-ascii

          Any where you put them other then the door panel is uncomfortable. I always advise that you double up some masking tape and put it on the dash where you intend to out the switches and drive down the freeway and see that it is a reach. 
       The factory position is perfect. The only spot I would consider other then stock would be on the side if the seat base.
        Years ago when I converted my first Van from  manual to power I had the switches in the left side of the dash by the air grill and even though I had an Express up and down system it still sucked.

                      Stacy 
     

Sent from my iPhone

> On Aug 27, 2017, at 9:18 AM, Toomey Douglas <drt@UOREGON.EDU> wrote:
> 
> Does any one on the list have thoughts on relocating the power window switches?  Did you use the gowesty package or design your own?
> 
> Smokey in Oregon today!!
> 
> Thanks,
> 
> Doug