Date:         Thu, 31 Aug 2017 08:11:19 -0700
Reply-To:     David McNeely <davmcneely40@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David McNeely <davmcneely40@GMAIL.COM>
Subject:      Re: FYI.. oil drain plug
Comments: To: OlRivrRat <OlRivrRat@comcast.net>
In-Reply-To:  <2A82F31A-B87A-422E-AB75-E2048CA29057@comcast.net>
Content-Type: text/plain; charset="UTF-8"

Yes, good to know.  One question:  When I bought my camper (1991 Volkswagen
Vanagon GL Campmobile), it had a non-standard oil plug, with a 17" head.
Due to the recessed fit of the plug it was very difficult to fit a wrench
to the plug head.  I obtained a standard plug, I don't remember where now,
perhaps used.

mcneely

On Thu, Aug 31, 2017 at 8:04 AM, OlRivrRat <OlRivrRat@comcast.net> wrote:

>         Good Info to Know ~
>
> Begin forwarded message:
>
> > From: Dan N <dn92610@GMAIL.COM>
> > Date: 30 August , 2017 8:49:45 PM MDT
> > To: vanagon@GERRY.VANAGON.COM
> > Subject: FYI.. oil drain plug
> > Reply-To: Dan N <dn92610@GMAIL.COM>
> >
> > Recently I did an oil change.. the plug came out good, threads are
> good...
> > but the head of the plug is quite bad... I went AutoZone to look for
> > another one.. they don't have the exact same but I found this one as
> exact
> > fit...
> >
> > # 653136 - M14 Honda...
> >
> > it has a rubber washer, the head size is 17mm vs. 13mm
> >
> > dan
>