If you are using the wires that go directly to the motor, up/down is determined by reversing plus and minus. No connection to the housing is needed. The diagrams for the window circuits are quite challenging. Just finding them in the Bentley is often impossible for me. :-) Larry A.
On Wed, Sep 6, 2017 at 12:15 AM, KI4TLF <ki4tlf@gmail.com> wrote: > I need to run my power window down on a '90 Carat so I can remove the > window > and components from the door. > > Stared at the drawing til I'm cross eyed, but am no good at electrical > drawings. > > Does the power window motor use the housing as a ground and the power > switch > wires to go up or down? > > Or does it just reverse the positive and negative to go up/down? > > Thanks, > > GregM > |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.