Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2017, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Tue, 5 Sep 2017 19:14:00 -0700
Reply-To:     Rick Cooper <rickdcooper@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Rick Cooper <rickdcooper@GMAIL.COM>
Subject:      Re: Radiator fan switch
In-Reply-To:  <CY4PR20MB130388D99A91545F820CF97AA0960@CY4PR20MB1303.namprd20.prod.outlook.com>
Content-Type: text/plain; charset="UTF-8"

I've got the same or at least a similar problem with my radiator fan.

The low-speed fan kicks in as expected but the high-speed fan never kicks in. But I know it works since I've done the jumper test at both the switch and at the high-speed relay. I have replaced the switch.

Maybe the coolant is not getting hot enough for it to kick in -- I'm in Victoria, BC where it never really gets super hot, but I would have thought that going up long hills at highway speed on a hot day (~85 degrees F) should be enough to trigger the high-speed fan.

At what temp should it kick in? I've got an infrared temp gun so I could test that.

Thanks, Rick

On Tue, Sep 5, 2017 at 3:24 PM, Dennis Haynes <d23haynes57@hotmail.com> wrote:

> Is the radiator getting hot? For testing the wiring there are three wires > on the fan switch. One is power from the fuse box. That wire jumped to the > middle will give you slow speed. The two outside wires jumped will give you > super-fast high speed. If the fan turns on with the AC than most likely the > fan resistor is good. It is possible you just are not getting the coolant > hot enough to call for the fan. Infrared temp gun can help here. > > Dennis > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf > Of David Bjorkman > Sent: Tuesday, September 5, 2017 1:24 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Radiator fan switch > > Hi all; > Still in SC. replaced the radiator and condenser (after some body work) > and am having trouble with the fan coming on. Turning on the A/C gets > starts the fan, so I know it works, but it won't start when the engine gets > hot. Fuses check out OK. How does one check the radiator fan switch. I > know that I have to jumper something, but not sure what. I would really > like to get this fixed and get back home. > > Thanks; > Dave B. >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.