Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2017, week 1)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 6 Sep 2017 13:59:03 -0400
Reply-To:     "email99@bellsouth.net" <email99@BELLSOUTH.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "email99@bellsouth.net" <email99@BELLSOUTH.NET>
Subject:      Front shift rod installation help needed
Content-Type: text/plain; charset=utf-8; format=flowed

Is the Front Shift Rod reinstalled from the front or from the rear through the bushing hole in the cross member (with the bushing out, of course)? This is the shift rod that bolts to the bottom of the Gear Shift Lever and has the plastic tabs on the fork.

I was able to remove this from the front to replace the plastic tabs but it took some modest force and it's not going to go back in that way. I'm wondering if the end with the plastic tabs will go through the hole for the bushing in the cross member? Can this be done with the Vanagon on jack stands or does it have to be on a lift? I'm having difficulty because the rear sway bar and the auxiliary air conditioning condenser seem to be in the way of manipulating the forked end of the shift rod through the bushing mounting hole.

This is a 1986 2WD with a 4-speed manual transmission. I would like to know how it fits in before I start taking off the parts mentioned above.

Any helpful comments will be appreciated.

Thanks,

Ed


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.