Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (September 2017, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 13 Sep 2017 20:00:53 -0700
Reply-To:     Alistair Bell <albell@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alistair Bell <albell@SHAW.CA>
Subject:      Re: Low readings from gas gauge and temp gauge..84 tintop
Comments: To: Neil N <musomuso@GMAIL.COM>
In-Reply-To:  <CAB2Rwfh_ZE27znP0e_b4uYUpTbiCBHO+BCmxUkwMkT6wnG_67A@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii

Yeah I goofed.

Volt reg not supplying to tach, sorry

Ab

> On Sep 13, 2017, at 7:18 PM, Neil N <musomuso@GMAIL.COM> wrote: > > I"m seeing 15 buss switched positive to tach and voltage stabilizer > but it doesn't look like the voltage stabilizer controls positive to > the tach. > > Don. > > P 97.43 in Bentley shows a ground from 10 ("behind dash") to 14/5 of > the big white connector to the cluster. Inside the cluster, in part, > this ground connects to voltage stabilizer, hi beam indicator light > and, the coolant gauge. Most likely to the blinking light portion. > > There is a ground path on the blue ribbon that's prone to failing. > Image of failing or failed path on a diesel cluster blue ribbon: > > https://photos.app.goo.gl/2XQV3wm4XdRtcPot1 > > Ground to the voltage stabilizer is provided via the mounting tab, or, > a leg on the stabilizer. > > Neil. > >> On 9/13/17, Liberte, Joel <joel.liberte@hpe.com> wrote: >> >> Does that voltage also drive a tach? >> >> Joel >> >> >> >> -----Original Message----- >> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of >> Alistair Bell >> Sent: Wednesday, September 13, 2017 5:46 PM >> To: vanagon@GERRY.VANAGON.COM >> Subject: Re: Low readings from gas gauge and temp gauge..84 tintop >> >> Apart from bad connections, those two gauges share the distinction of being >> fed by the voltage reg chip on the foil. > > > -- > Neil n > > Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca> > > 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy> > > 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

> > Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.