Date:         Thu, 21 Sep 2017 18:41:58 -0600
Reply-To:     OlRivrRat <OlRivrRat@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         OlRivrRat <OlRivrRat@COMCAST.NET>
Subject:      Re: Advise me on a radiator change...
Comments: To: David Beierl <dbeierl@ATTGLOBAL.NET>
In-Reply-To:  <CAMOH8LKPy5ecwSvBbJBS12Fk0nSdKT67M8pLKdV88eXRFnc50g@mail.gmail.com>
Content-Type: text/plain; charset=us-ascii

                        Ya & So ~

                ORR ~ DeanB Specified >

       If Your Coolant & Rad to Plastic Pipes Hoses Are Not In Need of Replacement

You can Clamp the Hoses near the Rad & only have to drain the Coolant that is in

the Rad ~ Makes Refill & Bleed Much Easier as well ~

                & ORR ~ DeanB Qualified/Justified His Specification with >

       "If Your Coolant & Rad to Plastic Pipes Hoses Are Not In Need of Replacement"

Which You chose to leave out ~ Kinda Like Bentley left out any Justification for their

Specification > Probably 'cause there Wasn't one ~

                                                        ORR ~ DeanB

On 21 Sep , 2017, at 2:02 PM, David Beierl wrote:

>> 
>> You can Clamp the Hoses near the Rad & only have to drain the Coolant that
>> is in
>> 
>> the Rad ~ Makes Refill & Bleed Much Easier as well ~
> 
> 
> Bentley 19.6 specifies new coolant if you replace heater core, radiator,
> heads/gaskets, or engine.
> 
> Yrs,
> d