Much thanks Mark. Yes. Tape is level with oil pan as is the builders level. Input shaft is cut! Thanks again! Neil. On 10/2/17, vw_van_fan_Mark <madvws@cox.net> wrote: > Since the tape measure bridging the 2 lower tranny studs appears to be > parallel to the bottom of the 50 degree oil pan, YES. > > Mark > > > > Neil N wrote: >> Image showing stud distance OC, studs mounted to Kennedy adaptor plate: >> >> https://photos.app.goo.gl/xHEc4x7kGZjkKXj63 >> >> Image showing level on studs, lining up with oil pan bottom, >> protractor angle finder at 50ยบ
-- Neil n Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.