You are probably 1 of the "Lucky 1s" that got the version with the Built In Automatic Cruise Control by mistake ~ {:~))
On 5 Oct , 2017, at 9:53 AM, Andrew R. wrote: > Hi all, > > Have a couple hundred miles on the this unit now. Initial feedback was > great until this morning. > > http://www.gowesty.com/product-details.php?id=24718 > > I experienced slow or no return on the TB upon letting off the gas on the > freeway. Go to shift from 3rd to 4th and the RPMs remained steady in the > 3-3.5k range through the shift. If I left the van in gear and slowed down > via braking to 2K RPM or thereabouts, the idle would return to normal upon > depressing the clutch. Let off the accelerator while cruising at 3k RPM and > I could tell the van was not decelerating as it should be. Depress the > clutch pedal and RPMs did not drop to idle levels. TB was not closing. > > Thoughts? I'm wondering if the original tension spring isn't up to the task > and needs to be bent/shortened some to increase return force on the TB. > Never had this issue before the new TB. > > 87 GL w/ Rocky Jennings 2.2L motor. > > thanks, > Andrew |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.