Date:         Fri, 27 Oct 2017 21:08:03 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      =?UTF-8?Q?Re=3A_Diesel_Engine_Position=3A_4=C2=BA_Angle_From_Centre_of?=
              =?UTF-8?Q?_Rear_Wheels?=
Comments: To: Jim Arnott <jrasite@eoni.com>
In-Reply-To:  <CEA7D181-98B7-46AB-A190-3E39A9E2022A@eoni.com>
Content-Type: text/plain; charset="UTF-8"

Thanks Jim!

I'm diving into making a custom lower profile intake manifold. Establishing
engine position obviously plays into the process.

This should be interesting.   ;^)

Neil.

On Fri, Oct 27, 2017 at 12:40 PM, Jim Arnott <jrasite@eoni.com> wrote:

1982 Diesel - 406 mm from flat area aft of the engine cover gasket (10 mm
> or so wide) to the c/l of the crank bolt.
>
> Haven’t opened the ABA up yet.
>
>
> > On Oct 26, 2017, at 7:56 PM, Neil N <musomuso@GMAIL.COM> wrote:
>
> > For Vanagon owners with a diesel or gas VW inline gas engine mounted on
> > diesel carrier bars, ..... how far down is the centre of the crank
> pulley from
> > engine lid bottom?
>


-- 
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>