Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (October 2017, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Wed, 25 Oct 2017 11:02:37 -0700
Reply-To:     Steven Johnson <sjohnso2000@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Steven Johnson <sjohnso2000@GMAIL.COM>
Subject:      Re: Oil heat exchanger fail.. more
Comments: To: Carl Hansen <carl_hansen@ieee.org>
In-Reply-To:  <D6E08860-0892-429D-BCFE-6FE30B2C6164@ieee.org>
Content-Type: text/plain; charset="UTF-8"

My stock oil cooler on my 91 Westy had the gasket fail and so lost most of my oil not far from my home. I could see a trail of oil heading back up the road from where I came. The cooling part never failed. Had a local VW mechanic replace the gasket with no other problems after for about 25K miles since.

Steven 91 Westy

On Wed, Oct 25, 2017 at 9:27 AM, Carl Hansen <carl_hansen@ieee.org> wrote:

> In all my years (decades) of VW ownership, starting with a '78 > Scirocco thru the current '03 EuroVan I have never had the stock > sandwich oil cooler fail. There's got to be more than a dozen models > represented in the mix. > > Ch > > > Date: Wed, 25 Oct 2017 06:27:25 +0000 > From: Todd Last <rubatoguy@COMCAST.NET> > Subject: Re: Oil heat exchanger fail.. more > > This style of heat exchange is common in many engines these days. I > had heard that they are to aid in engine warm up as well as cooling - > the main reason was to help meet tightened emission requirements. > > Todd > > ----- Original Message ----- > > From: "Dennis Haynes" <d23haynes57@HOTMAIL.COM> > To: vanagon@GERRY.VANAGON.COM > Sent: Tuesday, October 24, 2017 10:00:25 AM > Subject: Re: Oil heat exchanger fail.. more > > You are correct in the theory of operation for the cooler and how it > is plumbed. When I had a motor home with the Ford Triton V-10, the oil > cooler was fed from the lower radiator hose with a venture manifold. > Yes, the oil cooler feed and return went to the lower hose. No > radiator flow such as cold engine, no cooling for the oil. As flow > increased, cooler coolant from the radiator would be used to cool the > oil, not hot coolant from under the thermostat. > > As for warming the oil faster during warm except for short trips in > very cold weather there is little benefit. Fun Bus had the original > cooler removed and replaced with a thermostatically control oil to air > exchanger, placed in front of the radiator before its first oil > change. Just turned 321K last Saturday so no engine harm there. > > Dennis >


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.