|
I shot some contact cleaner in my rocker switch worked it a bunch works great now Ed Sent from my iPad > On Nov 7, 2017, at 9:09 AM, Pat Spragge <spraggepat@GMAIL.COM> wrote: > > Bruce, > > You may have fixed this issue, but I just had the same problem. After checking grounds on the front and rear lights with no improvement, I removed the switch and disassembled it. There was old, dry grease in I’d and I cleaned it up. Works fine now. > > Sent from my iPad > >> On Oct 29, 2017, at 10:06 AM, Bruce Todd <beeceetee@GMAIL.COM> wrote: >> >> Hi all - my hazard signals are only working on the driver's side and not >> the passenger side front or back. With lights on or off they only work on >> the driver's side front and rear. >> >> The turn signal indicators all work otherwise under regular use. >> >> Is this pretty much a relay issue or is there possibly another cause? This >> is a 1986 Westfalia Syncro. >> >> Thanks. >> >> Bruce |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.