Date:         Tue, 7 Nov 2017 18:49:40 -0800
Reply-To:     Edward V Barger <edvbarger@MAC.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Edward V Barger <edvbarger@MAC.COM>
Subject:      Re: Hazard lights
Comments: To: Pat Spragge <spraggepat@GMAIL.COM>
In-Reply-To:  <D73720A2-670D-4449-BF98-38BD268B2CFE@gmail.com>
Content-type: text/plain; charset=utf-8

I shot some contact cleaner in my rocker switch worked it a bunch works great now

Ed

Sent from my iPad

> On Nov 7, 2017, at 9:09 AM, Pat Spragge <spraggepat@GMAIL.COM> wrote:
> 
> Bruce,
> 
> You may have fixed this issue, but I just had the same problem. After checking grounds on the front and rear lights with no improvement, I removed the switch and disassembled it. There was old, dry grease in I’d and I cleaned it up. Works fine now.
> 
> Sent from my iPad
> 
>> On Oct 29, 2017, at 10:06 AM, Bruce Todd <beeceetee@GMAIL.COM> wrote:
>> 
>> Hi all - my hazard signals are only working on the driver's side and not
>> the passenger side front or back.  With lights on or off they only work on
>> the driver's side front and rear.
>> 
>> The turn signal indicators all work otherwise under regular use.
>> 
>> Is this pretty much a relay issue or is there possibly another cause?  This
>> is a 1986 Westfalia Syncro.
>> 
>> Thanks.
>> 
>> Bruce