Date:         Tue, 7 Nov 2017 09:09:45 -0800
Reply-To:     Pat Spragge <spraggepat@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Pat Spragge <spraggepat@GMAIL.COM>
Subject:      Re: Hazard lights
Comments: To: Bruce Todd <beeceetee@GMAIL.COM>
In-Reply-To:  <CAK9Aa+mWx-rsjOjD6Lda+5jvSEDLB=n=Dq3yXMa4303-MnYEDQ@mail.gmail.com>
Content-Type: text/plain; charset=utf-8

Bruce,

You may have fixed this issue, but I just had the same problem. After checking grounds on the front and rear lights with no improvement, I removed the switch and disassembled it. There was old, dry grease in I’d and I cleaned it up. Works fine now.

Sent from my iPad

> On Oct 29, 2017, at 10:06 AM, Bruce Todd <beeceetee@GMAIL.COM> wrote:
> 
> Hi all - my hazard signals are only working on the driver's side and not
> the passenger side front or back.  With lights on or off they only work on

> the driver's side front and rear.
> 
> The turn signal indicators all work otherwise under regular use.
> 
> Is this pretty much a relay issue or is there possibly another cause?  This
> is a 1986 Westfalia Syncro.
> 
> Thanks.
> 
> Bruce