Date: Sat, 6 Jan 2018 13:58:15 -0800
Reply-To: Alistair Bell <albell@SHAW.CA>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Alistair Bell <albell@SHAW.CA>
Subject: Re: Clamshell toolbox
In-Reply-To: <CAAj276yjqyne5EgzjSFMLMVRF6xUjjLaKivX3mqWzNw_YDf=mQ@mail.gmail.com>
Content-Type: text/plain; charset=utf-8
I have to think that it doesn’t have any real effect on crash worthiness. It seems like poor design by vw to have a removable item being important to crash protection.
Poor design is an understatement, the legal liability issue is obvious.
Alistair
> On Jan 6, 2018, at 1:53 PM, Ralph Meyermann <ralphmeyermann@gmail.com> wrote:
>
> I figure a tool box filled with tools is better than no tire at all. Safer that a propane tank I'd think.
>
>> On Jan 6, 2018 3:26 PM, "Alistair Bell" <albell@shaw.ca> wrote:
>> You have any documentation backing this up? It’s interesting subject, perhaps the owners manual has big warnings in it saying that spare must be in place all the time?
>>
>> Haven’t seen those warnings but maybe you have. Not being snarky, I truly would like to see the documentation.
>>
>> Alistair
>>
>> > On Jan 6, 2018, at 12:34 PM, Stacy Schneider <vwcrewman@GMAIL.COM> wrote:
>> >
>> > I would not drive a van without a spare tire up front. The tire is part of the crash worthiness of these vans.
>> > I want all the protection I can get. Even if you have a rear mounted tire you can always leave the stock wheel in place.
>> >
>> > Stacy
>> >
>> > Sent from my iPhone
>> >
>> >> On Jan 6, 2018, at 11:13 AM, Ralph Meyermann <ralphmeyermann@GMAIL.COM> wrote:
>> >>
>> >> No pics yet, I have some of my original adapted one. The refined version
>> >> should be lighter/cleaner looking and seal out the elements better. Weight
>> >> depends on how much tools/parts you cram inside. Mine got kinda heavy for
>> >> the 12day 3k mile West coast trip and back.
>> >>
>> >>
>> >>> On Jan 6, 2018 1:09 PM, "Chris S" <szpejankowski@gmail.com> wrote:
>> >>>
>> >>> I like the idea. Extra diesel fuel tank? My thought is that anything heavy
>> >>> in spare tire cavity will be difficult to close. Got pics?
>> >>>
>> >>> Chris
>> >>>
>> >>>> Wiadomość napisana przez Ralph Meyermann <ralphmeyermann@GMAIL.COM> w
>> >>> dniu 06.01.2018, o godz. 10:34:
>> >>>>
>> >>>> Howdy Volks. After going with a rear spare tire carrier, I was pondering
>> >>>> what to do with that available space. I ended up adapting my home made
>> >>>> larger clamshell/tire carrier into a toolbox. I found it handy.
>> >>> Currently I
>> >>>> took it to my machine/Fab shop guys to make a refined design/prototype.
>> >>>> Roughly 27"x 27" the front of it has 45° angles on the sides and 7"
>> >>> tall.
>> >>>> The first quote was $211. I went downs and verified a few design aspects
>> >>>> including a better sealing surface for the lid and how it fastens down.
>> >>> The
>> >>>> first one/prototype is currently being built. Looking at $211-$250 final
>> >>>> cost from machine shop, I don't know what shipping or anything could be
>> >>>> yet. Hopefully It'll be what I envision and be able to have them
>> >>> available
>> >>>> for those with alternative spare tire carriers. Storage is worth it's
>> >>>> weight in gold, Westy or tin top.
>> >>>
|