Date: Sat, 6 Jan 2018 15:53:21 -0600
Reply-To: Ralph Meyermann <ralphmeyermann@GMAIL.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Ralph Meyermann <ralphmeyermann@GMAIL.COM>
Subject: Re: Clamshell toolbox
In-Reply-To: <B03D32FB-F60D-4CFD-8948-07B8AAAC0CA9@shaw.ca>
Content-Type: text/plain; charset="UTF-8"
I figure a tool box filled with tools is better than no tire at all. Safer
that a propane tank I'd think.
On Jan 6, 2018 3:26 PM, "Alistair Bell" <albell@shaw.ca> wrote:
> You have any documentation backing this up? It’s interesting subject,
> perhaps the owners manual has big warnings in it saying that spare must be
> in place all the time?
>
> Haven’t seen those warnings but maybe you have. Not being snarky, I truly
> would like to see the documentation.
>
> Alistair
>
> > On Jan 6, 2018, at 12:34 PM, Stacy Schneider <vwcrewman@GMAIL.COM>
> wrote:
> >
> > I would not drive a van without a spare tire up front. The tire is part
> of the crash worthiness of these vans.
> > I want all the protection I can get. Even if you have a rear mounted
> tire you can always leave the stock wheel in place.
> >
> > Stacy
> >
> > Sent from my iPhone
> >
> >> On Jan 6, 2018, at 11:13 AM, Ralph Meyermann <ralphmeyermann@GMAIL.COM>
> wrote:
> >>
> >> No pics yet, I have some of my original adapted one. The refined version
> >> should be lighter/cleaner looking and seal out the elements better.
> Weight
> >> depends on how much tools/parts you cram inside. Mine got kinda heavy
> for
> >> the 12day 3k mile West coast trip and back.
> >>
> >>
> >>> On Jan 6, 2018 1:09 PM, "Chris S" <szpejankowski@gmail.com> wrote:
> >>>
> >>> I like the idea. Extra diesel fuel tank? My thought is that anything
> heavy
> >>> in spare tire cavity will be difficult to close. Got pics?
> >>>
> >>> Chris
> >>>
> >>>> Wiadomość napisana przez Ralph Meyermann <ralphmeyermann@GMAIL.COM> w
> >>> dniu 06.01.2018, o godz. 10:34:
> >>>>
> >>>> Howdy Volks. After going with a rear spare tire carrier, I was
> pondering
> >>>> what to do with that available space. I ended up adapting my home made
> >>>> larger clamshell/tire carrier into a toolbox. I found it handy.
> >>> Currently I
> >>>> took it to my machine/Fab shop guys to make a refined
> design/prototype.
> >>>> Roughly 27"x 27" the front of it has 45° angles on the sides and 7"
> >>> tall.
> >>>> The first quote was $211. I went downs and verified a few design
> aspects
> >>>> including a better sealing surface for the lid and how it fastens
> down.
> >>> The
> >>>> first one/prototype is currently being built. Looking at $211-$250
> final
> >>>> cost from machine shop, I don't know what shipping or anything could
> be
> >>>> yet. Hopefully It'll be what I envision and be able to have them
> >>> available
> >>>> for those with alternative spare tire carriers. Storage is worth it's
> >>>> weight in gold, Westy or tin top.
> >>>
>
|