Date:         Fri, 5 Jan 2018 13:57:50 -0500
Reply-To:     "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         "kenneth wilford (Van-Again)" <kenwilfy@COMCAST.NET>
Subject:      Question about VW Bus Heads?
Content-Type: text/plain; charset="UTF-8"

I have a customer that has an 1800cc VW Bus.  He wants to buy a new set of
heads.  I have a set for a 2000cc Bus (oval exhaust ports).  I know the
1800cc head actually have bigger valves than the 2.0l heads but is there
anything that would be a problem using the 2.0l heads on an 1.8l Type IV
engine?  I have been researching this and haven't really found a definite
answer on thesamba so I thought I would ask you folks.

--
Thanks,
Ken Wilford
John 3:16
www.vanagain.com

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.