Hi folks. This is for a Jetta engine swap but would likely apply to other swap platforms. Would a cable rated up to 220ยบ F survive in the Vanagon engine bay? I've been looking hard for a solution to my corroded O2, knock and crank position sensor wires. i.e. one that doesn't require me buying a 300 metre roll of wire. LOL. (seriously) In the past, I've had a little trouble ordering from this vendor but assuming I can.... Gauge is over sized but price is ok https://www.mcmaster.com/#7777T21 This looks feasible but somewhat pricey: https://www.mcmaster.com/#6650T39 Thoughts? Thanks Neil. -- Neil n Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay> |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.