Date:         Tue, 13 Feb 2018 21:13:08 +0000
Reply-To:     Sean Garrett <doit.outdoors@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Sean Garrett <doit.outdoors@YAHOO.COM>
Subject:      Re: hard to shift into 2nd
Comments: To: Dan N <dn92610@GMAIL.COM>
In-Reply-To:  <CAFdLW6k52Rr7r4GJ2gdzkUChfag0SHObGnk+N=8f2d0Qw-hiOg@mail.gmail.com>
Content-Type: text/plain; charset=UTF-8

Check your friction spots for the shifting shaft that runs from front to back underside. I clean old crapy grease and dirt off. Then smear new on, move the rod allot to ensure good lubrication.This might not be the problem but is easy and often improves the shifting.

Sean G 87 Subie Syncro waiting for a new 4th gear ;-)


On Tuesday, February 13, 2018, 2:01:36 PM MST, Dan N <dn92610@GMAIL.COM> wrote:  hi all,

on my 88 2WD Carat I have mechanic put in a new clutch slave cylinder, a
new rear shift linkage, the front shift linkage is about one year old...

now it's bit hard to get to 2nd from 1st gear... all other gear are fine
including reverse thought the shift lever feels a bit tighter..

is it because of the rear linkage is new and light? should I leave it alone
for awhile and it be better? or is there some adjustment to be made?

thanks

dan