Date:         Sun, 4 Mar 2018 09:49:56 -0500
Reply-To:     Stephen Grisanti <bike2vcu@YAHOO.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Stephen Grisanti <bike2vcu@YAHOO.COM>
Subject:      Re: Replacing lower vanagon sliding door skin
Comments: To: B Feddish <UprightBassGhost@hotmail.com>
In-Reply-To:  <CY4PR06MB2774AE472BC72DD637EB3884CEDB0@CY4PR06MB2774.namprd06.prod.outlook.com>
Content-Type: text/plain; charset=utf-8

Did not look that closely beyond finding it. 

Stephen

Mobile

> On Mar 4, 2018, at 9:14 AM, B Feddish <UprightBassGhost@hotmail.com> wrote:
> 
> Not sure how I missed that since I used tat same page to do the rear!  Anyway, he appears to leave part of the old one on, is that what I’m seeing? He cuts the bottom off but leaves the sides it looks like.
>  
> Thanks,
> Bryan
>  
>  
> From: Stephen Grisanti <bike2vcu@yahoo.com>
> Sent: Sunday, March 4, 2018 8:14:28 AM
> To: B Feddish; vanagon@GERRY.VANAGON.COM
> Subject: Re: Replacing lower vanagon sliding door skin
>  
> Our Quebecois friend Ben has several panel replacement projects documented on his website.  Click the link and scroll around.  Sometimes takes some digging to find what you want in English.    Good luck!
> 
> panel panneau
> 
> Stephen
> 
> panel panneau
> 
> 
> 
> On Sunday, March 4, 2018 8:05 AM, B Feddish <UprightBassGhost@HOTMAIL.COM> wrote:
> 
> 
> I replaced the right side rear panel on my 83.5 and that was pretty straightforward.  I will do the left side when we get another warm day here in the NE.  I want to do the lower door skin on the sliding door and I do not see any write-ups or videos.  How do I get the old one off, are there welds I drill out like the other panel and “unwrap” it?
> 
> Thanks,.
> Bryan
> 
>