Date:         Sun, 4 Mar 2018 21:36:59 -0500
Reply-To:     David Beierl <dbeierl@ATTGLOBAL.NET>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         David Beierl <dbeierl@ATTGLOBAL.NET>
Subject:      Re: Fuel pressure too high
Comments: To: Rick Cooper <rickdcooper@gmail.com>
In-Reply-To:  <CAG12ait2qrFinyw5-CD4czQKzNZ+wQ8nKPVtm3Dw4DnXc8nnaQ@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

>
> Pressure at the return hose is the same -- around 100psi.
>

Say exactly how you set up for this test?

If your return to the tank is blocked, 100 psi is in the region of how hard
the pump will push before its internal pressure relief valve starts sending
some of the pump output back to the input.

Yrs,
d

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!

Return to the archives @ gerry.vanagon.com

The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.