Date:         Thu, 19 Apr 2018 07:05:27 -0500
Reply-To:     Frank Condelli <RAlanen@AOL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Frank Condelli <RAlanen@AOL.COM>
Subject:      Re: Oil Pressure Kit
In-Reply-To:  <21aa693b-cd13-4b14-8eff-8321aacdceac@71.126.148.6>
Content-Type: text/plain; charset=us-ascii

        The push rod tube cover can be installed.  I have done it many times, no problem.  I have this kit on my personal van for years and many customers vans and never any problems.


> On Apr 18, 2018, at 11:00 PM, Automatic digest processor <LISTSERV@GERRY.VANAGON.COM> wrote:
> 
> Disadvantages:
> -you can't re-install the push-rod tube tin (or, at least, I have not been
> able to, even though the instructions say you can);
> -you have engine oil theoretically brought into your cabin (but in reality.
> the potential flow is so small through the eight feet of 1/8" tubing, even
> if you had a leak, it would be barely anything.  And the tube is well
> protected so there is no reason the system should develop a leak.)

       Please note that I will be away from my business traveling from December 16 until April 30, 2018.  Parts orders will be processed once or twice a week as needed by Stephen.  I will always be available for contact by E-mail.  If you phone, your call will be addressed by Stephen and he will either call you back or advise you to contact me directly by E-mail.  

Cheers, 
   
Frank Condelli
Almonte, Ontario, Canada
'87 VW Westy, '00 Kawasaki 250 Sherpa, "98 Ducati 750 Monster & Lionel Trains (Collection for sale)
Frank Condelli & Associates - Vanagon/Vanagon Westfalia Parts & Service in the Ottawa Valley
BusFusion a VW Camper camping event, Almonte, ON, June 07 ~ 10, 2018