Date:         Wed, 25 Apr 2018 11:52:04 -0700
Reply-To:     Neil N <musomuso@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Neil N <musomuso@GMAIL.COM>
Subject:      Re: Wiring for sink, etc.
Comments: To: B Feddish <UprightBassGhost@hotmail.com>
In-Reply-To:  <CY4PR06MB277420BE9B23F6F6CC3DEDA2CE8F0@CY4PR06MB2774.namprd06.prod.outlook.com>
Content-Type: text/plain; charset="UTF-8"

Assuming your volt meter or test light was connected to a good ground point
and that the fuse holder contacts are clean, (with a good fuse installed of
course), you should see battery voltage at both ends of one of those fuse
holders even if engine is off. Or..... if the sink pump etc connect to an
aux battery, is that battery and connections to it ok?

Neil.

On Wed, Apr 25, 2018 at 9:35 AM, B Feddish <UprightBassGhost@hotmail.com>
wrote:

..... I have checked the fuses behind the drivers seat.  They are both good
> but I noticed neither terminal had voltage on it either stationary or when
> the engine is running.
>



--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>