Possibly getting incorrect Eng' Temp Info ~
On 9 May , 2018, at 11:03 AM, thewestyman wrote: > I have also checked ground to both side of that connector and there is > continuity on both side. > Z > > -----Original Message----- > From: thewestyman > Sent: Wednesday, May 09, 2018 9:43 AM > To: vanagon@GERRY.VANAGON.COM > Subject: No "Flicker", what to do? > > Hi to all, > > I am working on my old but nice ‘82 Camper. My favorite. The only trouble > is, it would not start in the morning as it should. I would have to crank > it for two minutes and hope it will start before the battery gives up. > So, started to check in the book and now I am looking at the connector to > the Cold Start Valve, checking if it is delivering pulse to that injector, > often called the 5th injector. > > It does not. I tried it with and without the #1 wire off the coil. No > flicker, no voltage. > I can’t see anything in the book that would help. > > Would anyone know this? Please. > > Thanks to the Great List. > > Zoltan |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.