Have You determined that the Idle Control Module/Relay is in Good working order ~
On 22 May , 2018, at 11:12 AM, Pat Spragge wrote: > I’ve been trying to determine why my valve doesn’t seem to be vibrating on a 1989 2.1 auto Westy. > I have performed the “function” check in sec. 24.53 and checks fine. Additionally, the idle valve functions using a ‘test box’ designed to operate it. Also, Peter at VanCafe loaned me a new Stabilizer Module a while back to see if that was the issue...it wasn’t. > I was going to perform the 2nd check “regulator”, however I am unsure about the step where one connects the multimeter with adapter to idle stabilizer valve #1 in the photo. Problem is the photo shows the O2 sensor and not the valve. > Not sure how to proceed. > > Thx > Pat |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.