Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (May 2018, week 4)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Mon, 28 May 2018 11:38:04 -0700
Reply-To:     Dan N <dn92610@GMAIL.COM>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Dan N <dn92610@GMAIL.COM>
Subject:      Re: Vanagon Syndrome? ... please help
Comments: To: Dennis Haynes <d23haynes57@hotmail.com>
In-Reply-To:  <MWHPR20MB15510CF4A902C12DC98E0523A0680@MWHPR20MB1551.namprd20.prod.outlook.com>
Content-Type: text/plain; charset="UTF-8"

thanks a lot for your helps... I will save them for future reference for myself and friends...

I am sorry for using the wrong term of *"vanagon syndrome"*... I should know better and use something like *"problem similar to vanagon syndrome" *and sorry for this late report.

so here's the update report... since my son Nick is 1000+ miles away from me I can't help him myself and all can do is relaying your suggestions and some of mine..

I suggested the following:

- disconnect the O2 sensor --> nope - check the spark plug wires --> nope - check the Hall sensor wiring --> nope - check the Temp2 sensor wiring and connection --> nope

the last one is this: go under the bench, driver side, look at the computer, disconnect the harness, make sure it's clean and reconnect it tightly...

well.. bingo... the *"problem similar to vanagon syndrome" *is gone now for 500 miles and he's happy as a snail on a lettuce leaf...

aaah.. for some reason not clear to me and him the connector of the harness was loose or iffy (to say the best)...

now I want to share a problem happened to me too... on my way to So. Cal, 500 miles from home, making a stop for gas and my 1990 tintop didn't fire.. it cranked OK but no start... check fuel pump, check Hall sensor, check ignition switch, check computer harness, check spark plug wire, check Hall sensor wiring --> all for nope, no start... then as a last effort before calling for a tow, I unplug the connector going to a black box sitting on top of the coil and replug it.... and guess what? vrooom.. the engine fired up right away....

again thanks you all...

dan


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.