Date: Sat, 2 Jun 2018 16:25:41 -0400
Reply-To: Eric Caron <eric.caron@ICLOUD.COM>
Sender: Vanagon Mailing List <vanagon@gerry.vanagon.com>
From: Eric Caron <eric.caron@ICLOUD.COM>
Subject: Re: Sliding door question
In-Reply-To: <CAFnDXk3oMYWOwjmab5Qbhenp5ZGsG+Q+W4jz6qKzK1nmP8rjTQ@mail.gmail.com>
Content-Type: text/plain; charset=utf-8
Hi Jim and others,
It is well lubed and very clean.
Still I get no pop when opening
I get a reasonable resistence when closing.
I’ll look at some busses tomorrow to compare mine.
If my spring is broken I’m good with getting the new one or if Jim has a good one for a 85 I would be happy with that. I wanted to see if Jim had a original battery holder in his stock anyway!
Eric Caron
On Jun 2, 2018, at 13:27, Jim. Felder <jim.felder@gmail.com> wrote:
Replace I guess. I have later model door parts aplenty, probably the earlier ones are gone. Take off that cover (two screws, bump straight up from below) and take a look and make sure that what you have is in place and lubed. When you push it it at the back, with the flat of your hand on the rear of the door, it should not flop or collapse but should resist your push, and you should have to smack it good to push it home. Conversely, when you release the lever, it should smartly push out on its own.
Jim
On Sat, Jun 2, 2018 at 11:03 AM Eric Caron <eric.caron@icloud.com <mailto:eric.caron@icloud.com>> wrote:
This is great info.
I think my problem is in the back, but I am not sure how to confirm this. The spring on the door side of the rear connector seems loose and turns easily even as the door is in open and close position. I can’t imagine it is helping in any way.
Any tips on testing and ways to improve?
The rest of my door set up seems great. It runs quiet and smooth.
Tips for spring fix?
Eric Caron
85 GL auto
On Jun 1, 2018, at 17:26, Jim. Felder <jim.felder@GMAIL.COM <mailto:jim.felder@GMAIL.COM>> wrote:
Regarding "springing out" upon opening, you've got a wound spring in the
back that jacks a steel arm out when the back is released, which carries
the back of the door out away from the body on both early and late models.
If it doesn't spring out readily, you have to do more work yourself to get
the back free. More tugging. Yes, the "long handle" early doors take more
effort to open, but if the front release and back release work
together--the timing is of course done through adjusting the cable that
connects the two--and the front and back springs and catches are in good
shape, it should pop right open with either the early or late setup.
If your cable is slack, the front may unlatch but the back release will
take extended effort to free. After more wear, it won't open at all. Time
to take a look at it.
Jim
On Fri, Jun 1, 2018 at 2:38 PM Jack R <jack007@comcast.net <mailto:jack007@comcast.net>> wrote:
> What year... my 84 has a different mechanism than the later models, and is
> harder to open than our friends 90.
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com <mailto:vanagon@gerry.vanagon.com>] On Behalf
> Of Steve Williams
> Sent: Friday, June 1, 2018 2:19 PM
> To: vanagon@GERRY.VANAGON.COM <mailto:vanagon@GERRY.VANAGON.COM>
> Subject: Re: Sliding door question
>
> Dan, good advice.
>
> Related: My slider works well, but the handle requires quite a lot of
> force. Is that normal? Is there an adjustment?
>