Vanagon EuroVan
Previous messageNext messagePrevious in topicNext in topicPrevious by same authorNext by same authorPrevious page (June 2018, week 2)Back to main VANAGON pageJoin or leave VANAGON (or change settings)ReplyPost a new messageSearchProportional fontNon-proportional font
Date:         Sat, 9 Jun 2018 20:03:05 -0700
Reply-To:     Alistair Bell <albell@SHAW.CA>
Sender:       Vanagon Mailing List <vanagon@gerry.vanagon.com>
From:         Alistair Bell <albell@SHAW.CA>
Subject:      Re: Sliding door question
Comments: To: Syncrohead <syncrohead@AOL.COM>
In-Reply-To:  <C6F8A130-DB8D-430D-92F3-48F79558D96F@aol.com>
Content-Type: text/plain; charset=utf-8

Good man!

I’m looking forward to getting some.

Good work jim

Alistair

> On Jun 9, 2018, at 6:11 PM, Syncrohead <syncrohead@AOL.COM> wrote: > > Good news. > > A friend has recently worked with a bearing manufacturer on a new design and has commissioned them to produce urethane versions of the FOUR bearings previously only available in steel. The result is than now all SIX of the rolling elements in a Vanagon sliding door can soon be replaced with a set made up of Delrin and Urethane, eliminating all metal-to-metal contact in the rollers. > > A few of the first batch were sold at SyncroFest. It's amazing how quiet and smooth the slider can be with these replacements, plus some clean-up work. > > Look for announcements here or on TheSamba within a month or so about their general availability. > > Jim > >> On Jun 7, 2018, at 11:24 AM, Dan N <dn92610@GMAIL.COM> wrote: >> >> hi Stephen, >> >> I am not a vanagon specialist, not even seeking for perfection on my vans. >> Just sharing my observations and discoveries. >> The day you find away to make the sliding door as quiet as the one on a >> Toyota or Honda van... please share with us... >> btw... I am not saying putting sound deadener in the cavity will eliminate >> the noise... I am saying it will cut down the resonance.. to a musician the >> door door is still LOUD... to a jack hammer operator it's very quiet... >> >> thanks >> >>> On Thu, Jun 7, 2018 at 9:14 AM, Stephen Grisanti <bike2vcu@yahoo.com> wrote: >>> >>> Sound deadener inside the slider changes the tone of the sound but does >>> not eliminate it. Still loud in the middle of the night. >>> >>> Stephen >>> >>> >>> On Thursday, June 7, 2018 11:10 AM, Dan N <dn92610@GMAIL.COM> wrote: >>> >>> >>> I'd like to share my experiences regarding the sliding door - on some of my >>> vans I use Delrin rollers, on some I use OEM metal rollers to compare. >>> >>> - Delrin rollers are quieter but the kit came with 2 Delrin rollers for the >>> rear and the bottom tracks only. >>> >>> - Cleaning and sanding smooth the tracks help a lot, I'd think the noise

>>> came from the pitting corrosion on the rear and bottom tracks. >>> >>> - Strange enough on the vans with OEM metal rollers, on some it's almost as >>> quiet as the one with Delrin rollers. >>> >>> - I'd think a well balanced door is quieter than a unbalanced one - I think >>> weight distribution to rear, top and bottom tracks helps, it's a try, miss >>> and repeat job. I notice some door is easier to balance than other, may be >>> depending on how worn the track is. >>> >>> - Yes I put FatMat noise deadener on the cover of the rear track too, it's >>> help a bit. >>> >>> - I put FatMat noise deadener and pink fiberglass in cavity of the sliding >>> door. It helps to bring down the noise by cutting the resonance. I'd think >>> the hollow door acts as an empty drum and it amplifies the noise. >>> >>> >>> dan >>> >>> >>>


Back to: Top of message | Previous page | Main VANAGON page

Please note - During the past 17 years of operation, several gigabytes of Vanagon mail messages have been archived. Searching the entire collection will take up to five minutes to complete. Please be patient!


Return to the archives @ gerry.vanagon.com


The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.

Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.