> > I added the GoWesty SA kit, the one with the 4 headlight grill, not the > high power kit, which did not come with additional relays. I did the high > power kit, with the additional relay, many years ago. I will dig into this > further as clearly the increased amps from this and other accessories is > causing a problem. > If the relays are installed correctly, the only current passing through the dimmer switch (and ignition and headlight switches) will be the 200 mA or so needed by one or the other of the relay coils. 400 mA if both are operating (low beams on and stalk pulled). This will not account for the melting you see on the dimmer switch. Yrs, d |
Please note - During the past 17 years of operation, several gigabytes of
Vanagon mail messages have been archived. Searching the entire collection
will take up to five minutes to complete. Please be patient!
Return to the archives @ gerry.vanagon.com
The vanagon mailing list archives are copyright (c) 1994-2011, and may not be reproduced without the express written permission of the list administrators. Posting messages to this mailing list grants a license to the mailing list administrators to reproduce the message in a compilation, either printed or electronic. All compilations will be not-for-profit, with any excess proceeds going to the Vanagon mailing list.
Any profits from list compilations go exclusively towards the management and operation of the Vanagon mailing list and vanagon mailing list web site.